Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Verify the scan tool parameter:Primary Key Status = Valid
- If not the specified value
- Program the control module:K36 Inflatable Restraint Sensing and Diagnostic Module
- Verify DTC B1001 is not set.
- If the DTC is set - Replace the component:K36 Inflatable Restraint Sensing and Diagnostic Module
- Go to next step: If the DTC is not set
- All OK.
- Go to next step: If the specified value
- All OK.
NOTE:
Refer to:SIR Service Precautions