Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Perform the appropriate scan tool control function:Passenger Air Bag Off Indicator - On and Off
Verify the component works as specified:Passenger Air Bag Off Indicator = On and Off
- If the component does not turn On and Off
Refer to: Circuit/System Testing
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- Perform the appropriate scan tool control function:Passenger Air Bag On Indicator - On and Off
Verify the component works as specified:Passenger Air Bag On Indicator = On and Off
- If the component does not turn On and Off
Refer to: Circuit/System Testing
- Go to next step: If the component turns On and Off
- If the component does not turn On and Off
- All OK.