LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 82 (Supplemental Restraint System) >> Diagnostic Information and Procedures >> Airbag Indicator Malfunction (Passenger) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Perform the appropriate scan tool control function:Passenger Air Bag Off Indicator - On and Off

    Verify the component works as specified:Passenger Air Bag Off Indicator = On and Off

    • If the component does not turn On and Off 

      Refer to: Circuit/System Testing

    • Go to next step: If the component turns On and Off 
  3. Perform the appropriate scan tool control function:Passenger Air Bag On Indicator - On and Off

    Verify the component works as specified:Passenger Air Bag On Indicator = On and Off

    • If the component does not turn On and Off 

      Refer to: Circuit/System Testing

    • Go to next step: If the component turns On and Off 
  4. All OK.
scientia non olet · About LEMON Manuals