Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Verify the condition does not exist:Air Bag Malfunction Indicator = Flashing
- If the condition exists
Refer to:K36 Inflatable Restraint Sensing and Diagnostic Module: Programming and Setup
- Go to next step: If no condition exists
- If the condition exists
- Verify there are no DTCs set related to the following system/component:K36 Inflatable Restraint Sensing and Diagnostic Module
- If a related DTC is set
- Go to next step: If a related DTC is not set
- Perform the appropriate scan tool control function:All Indicators @ P16 Instrument Cluster - On and Off
Verify the component activates:Air Bag Malfunction Indicator = On and Off
- If the component does not work as specified
Replace the component:P16 Instrument Cluster
- Go to next step: If the component works as specified
- If the component does not work as specified
- All OK.