LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 80 (Steering Wheel And Column) >> Diagnostic Information and Procedures >> Heated Steering Wheel Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Heated Steering Wheel - Off
  3. Verify the following conditions do not exist:
    • Heated Steering Wheel Indicator = On
    • Heated Steering Wheel = Activated
    • If a condition exists - Heated Steering Wheel = Activated 

      Refer to:Heated Steering Wheel Malfunction 

    • If a condition exists - Heated Steering Wheel Indicator = On 

      Refer to: Circuit/System Testing

    • Go to next step: If none of the conditions exists 
  4. Press and release the switch:Heated Steering Wheel Switch
  5. Verify the following conditions do not exist:
    • Heated Steering Wheel Indicator = Off
    • Heated Steering Wheel = Not Activated
    • If a condition exists - Heated Steering Wheel = Not Activated 

      Refer to:Heated Steering Wheel Malfunction 

    • If a condition exists - Heated Steering Wheel Indicator = Off 

      Refer to: Circuit/System Testing

    • Go to next step: If none of the conditions exists 
  6. All OK.