LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Suspension System General Diagnosis) >> Diagnostic Information and Procedures >> Suspension Bottoms

Suspension Bottoms

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Step Action Yes No
DEFINITION: A loud bang or thump that can usually be felt and/or heard when the vehicle is driven over bumps. This condition is commonly noticed when the vehicle trim height is too low.
1 Did you review the General Description and perform the necessary inspections? Go to Step 2  Go to Symptoms - Suspension General Diagnosis 
2 Verify that the suspension bottoms.
Does the vehicle operate normally?
System OK Go to Step 3 
3 Inspect for vehicle overloading compared to the weight rating on the vehicle certification label and correct the overloading condition as necessary.
Did you find and correct the condition?
Go to Step 6  Go to Step 4 
4 Inspect the following components:
Did you find and correct the condition?
Go to Step 6  Go to Step 5 
5 Inspect the vehicle trim height. Trim Height Inspection 
Did you complete the trim height inspection procedure?
Go to Step 6  -
6 Operate the vehicle in order to verify the repair.
Did you correct the condition?
System OK Go to Step 3