Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Wheel Speed Sensor (1) - Install
- CAUTION:
Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Retainer (1) @ Upper Control Arm - Secure [4x]
Retainer (1) @ Rear Suspension Cradle - Secure
Retainer (1) @ Rear Suspension Cradle - Secure
- Wheel Speed Sensor Electrical Connector - Connect
- Verify the repair is complete. Diagnostic Repair Verification