Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Wheel Speed Sensor (1) - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Fastener Caution

Wheel Speed Sensor Bolt (1) - Install and tighten 9 N.m (80 lb in)
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Steering Knuckle - Secure
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Front Brake Hose - Secure [2x]
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Side Rail - Secure [3x]
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Radiator Support - Secure
Wheel Speed Sensor Electrical Connector - Connect
Install the appropriate front wheelhouse liner:
- Front Wheelhouse Liner - Right Side Front Wheelhouse Liner Replacement - Right Side (LFV, LTG)
- Front Wheelhouse Liner - Left Side Front Wheelhouse Liner Replacement - Left Side
Verify the repair is complete. Diagnostic Repair Verification