Circuit/System Description
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to:ABS Description and Operation
| Circuit | Description |
|---|---|
| B+ - Terminal 1 | The output circuit is switched from ground to 12 V to activate the component. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| K43 Power Steering Control Module | Steering shaft torque and position sensors inside the control module measure the input from the driver. The electric power steering motor amplifies the torque that the driver applies to the steering wheel. |
| K17 Electronic Brake Control Module | The control module K17 can increase and decrease the brake pressure on all 4 wheels individually in order to fulfill these functions:
The control module K17 can also influence the following control modules to limit the amount of produced torque:
|