Circuit/System Description
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to:ABS Description and Operation
| Circuit | Description |
|---|---|
| B+ - Terminal 1 | The output circuit is switched from ground to 12 V to activate the component. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| Q5 Brake Pressure Modulator | The brake pressure modulator has several solenoid valves and an electric pump to increase or decrease the hydraulic brake pressure for each wheel independently. |
| K17 Electronic Brake Control Module | The control module K17 can increase and decrease the brake pressure on all 4 wheels individually in order to fulfill these functions:
The control module K17 can also influence the following control modules to limit the amount of produced torque:
|