Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

C0186 00-or-C018B 5A

Lateral Accelerometer Signal = Out Of Range

C0186 5A

Lateral Accelerometer Signal = Not Plausible

C0186 71

Lateral Accelerometer Signal = Invalid Signal Received @ Electronic Brake Control Module
Ground circuit @ Multi-Axis Acceleration Sensor Module = Open/High Resistance
Ignition circuit @ Multi-Axis Acceleration Sensor Module = Short to Ground

C018A

Lateral Acceleration Sensor 2 Signal = Out Of Range

C019A

Yaw Rate Sensor Signal 2 = Out Of Range

C027F

Longitudinal Acceleration Signals 1-2 Not Plausible

C0196 00-or-C019B 5A

Yaw Rate Signal = Out Of Range

C0196 5A

Yaw Rate Signal = Out Of Range
Yaw Rate Signal = Not Plausible

C0196 71

Short to Ground-or-Open/High Resistance @ Ignition circuit
Lateral Accelerometer Signal = Invalid Signal Received @ Electronic Brake Control Module
Ground circuit @ Multi-Axis Acceleration Sensor Module = Open/High Resistance

C027E 5A-or-C0287 5A

Longitudinal Accelerometer Signal = Not Plausible

C0287 4B

Longitudinal Accelerometer Signal = Not Calibrated

C0287 71

Ground circuit @ Multi-Axis Acceleration Sensor Module = Open/High Resistance
Longitudinal Accelerometer Signal = Invalid Signal Received @ Electronic Brake Control Module
Ignition circuit @ Multi-Axis Acceleration Sensor Module = Short to Ground-or-Open/High Resistance