LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 78 (Antilock Brake System - Except Hybrid (Hp4)) >> Diagnostic Information and Procedures >> ABS Indicator Malfunction >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify that no DTCs are set.
    • Go to next step: If no DTC is set 
  3. Perform the scan tool control function:All Indicators Command - ON
    • ABS Indicator Control = OFF 

      Replace the component:P16 Instrument Cluster

    • Go to next step: ABS Indicator Control = ON 
  4. Ignition - On / Vehicle - In Service Mode
  5. Verify the indicator status:ABS Warning Indicator = ON - For 5 s
    • ABS Warning Indicator OFF 

      Replace the component:K17 Electronic Brake Control Module

    • Go to next step: ABS Warning Indicator = OFF 
  6. All OK.
scientia non olet · About LEMON Manuals