Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Install the rear shock absorber mount (3) onto the rear shock absorber (4).
- Install the rear suspension mount upper cup (2) onto the rear shock absorber (4).
- Install and tighten the rear suspension shock absorber upper mounting nut (1) to 20 N.m (15 lb ft).
Rear Shock Absorber (1) - Install - Shock Absorber Replacement
- Install the tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.
CAUTION:
Refer to Fastener Caution .