Rear Suspension Description and Operation
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
The rear suspension system on this vehicle is of the independent link type. Rear suspension adjustment is achieved through adjustable toe links and lower control arms. The rear coil springs are retained between the body and the lower control arm. Rubber insulators isolate the coil spring at both top and bottom. The rear suspension consists of 2 shock absorbers attached to the lower control arm and the reinforced body areas.
The rear suspension system performs the following functions:
- Maintains the relationship of the rear axle to the body
- Controls the torque reaction on acceleration and braking
The suspension system consists of the following components:
- Support assembly
- Coil springs and insulators
- Stabilizer shaft, insulators and stabilizer links
- Toe adjust links
- Upper lateral links
- Lower control arms
- Trailing arms
- Knuckles
- Wheel bearing/hub
- Shock absorbers