Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition ON.
- Verify that DTC C1588 is not set.
- If the DTC is set
- Perform the Park Brake Calibration learn procedure. Refer to Park Brake Calibration .
- Ignition ON.
- Apply and release the park brake.
- Verify the DTC is not set.
- If the DTC is set, replace the M104R Park Brake Actuator - Right.
- Go to next step: If the DTC is not set
- All OK.
- Go to next step: If the DTC is not set
- All OK.