Circuit/System Description
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to:Electronic Parking Brake Description
| Circuit | Description |
|---|---|
| Control - Terminal 12 | The output circuit is switched from ground to 12 V to activate the component. |
| Control - Terminal 13 | The output circuit is switched from ground to 12 V to activate the component. |
| Component | Description |
|---|---|
| M104L Park Brake Actuator - Left | The park brake function uses the same brake pads as the operational brake in the rear calipers. An electric motor in each caliper is used to apply and release the brake pads. |
| K17 Electronic Brake Control Module | The control module K17 can increase and decrease the brake pressure on all 4 wheels individually in order to fulfill these functions:
The control module K17 can also influence the following control modules to limit the amount of produced torque:
|