LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 74 (Inline Harness Connector End Views (X400-X920)) >> Inline Harness Connector End Views >> X408 Rear Chassis Harness to Body Harness (J69)

X408 Rear Chassis Harness to Body Harness (J69)

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM2474747Courtesy of GENERAL MOTORS COMPANY
GM2917338Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Rear Chassis
  • OEM Connector: 13815807
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 4-Way F 150 MX Series, Sealed (BK)
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 15456939
  • Service Connector: 19330690
  • Description: 4-Way M 1.5 Series, Sealed (BK)
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-2A (GY) No Tool Required Not Required Not Required Not Required Not Required
II Not Required J-35616-3 (GY) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 0.5 GY/BK 7127 I - Wheel Speed Sensor Control Left Rear 1 0.35 GY/BK 7127 II -
2 0.5 BU 884 I - Wheel Speed Sensor Signal Left Rear 2 0.35 BU 884 II -
3 0.5 GY/YE 7128 I - Wheel Speed Sensor Control Right Rear 3 0.35 GY/YE 7128 II -
4 0.5 VT 882 I - Wheel Speed Sensor Signal Right Rear 4 0.35 VT 882 II -