LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 73 (Inline Harness Connector End Views (X209-X360)) >> Inline Harness Connector End Views >> X321 Body Harness to Left Rear Seat Airbag Jumper Harness (AW7/AWF)

X321 Body Harness to Left Rear Seat Airbag Jumper Harness (AW7/AWF)

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
GM2750649Courtesy of GENERAL MOTORS COMPANY
GM2750650Courtesy of GENERAL MOTORS COMPANY
Connector Part Information
  • Harness Type: Body
  • OEM Connector: 13865326
  • Service Connector: 19368489
  • Description: 3-Way F 1.2 MCON Series, Sealed (YE)
Connector Part Information
  • Harness Type: Left Rear Seat Airbag Jumper
  • OEM Connector: Not Available
  • Service Connector: Service by Harness - See Part Catalog
  • Description: 3-Way M
Terminal Part Information

Terminal Type ID Terminated Lead Diagnostic Test Probe Terminal Removal Tool Service Terminal Tray Name Core Crimp Insulation Crimp
I Not Required J-35616-16 (LT GN) No Tool Required Not Required Not Required Not Required Not Required
II Not Required J-35616-17 (LT GN) No Tool Required Not Required Not Required Not Required Not Required
Pin Size Color Circuit Terminal Type ID Option Function Pin Size Color Circuit Terminal Type ID Option
1 0.35 OG/GY 5223 I - Left Rear Side Impact SIR Inflator Control 1 0.35 OG/GY 5223 II -
2 0.35 BN/OG 5224 I - Left Rear Side Impact SIR Inflator Control 2 0.35 BN/OG 5224 II -
3 0.35 BK 2550 I - Ground 3 0.35 BK 2550 II -