Circuit/System Description
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
For an overview of the component/system, refer to:Seat Belt System Description and Operation
| Circuit | Description |
|---|---|
| Signal | The control module input circuit has an internal resistance connected to 12 V. |
| Low Reference | Grounded through the control module. |
| Component | Description |
|---|---|
| B88P Seat Belt Switch - Passenger | When the seat belt is unbuckled the switch is closed, and when the seat belt is buckled the switch is open. |
| K36 Inflatable Restraint Sensing and Diagnostic Module | The control module monitors several sensors that can detect a collision. When a collision is detected, the control module will trigger certain air bags and seat belt pretensioners, depending on the angle and severity of the impact. |