LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Displays And Gauges) >> Diagnostic Information and Procedures >> DTC P250A (LFV or LTG) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check and correct the engine oil level.
  2. Ignition - On / Vehicle - In Service Mode
  3. Verify the scan tool parameter:Engine Oil Level = OK
    • If not the specified state 

      Refer to: Circuit/System Testing

    • Go to next step: If the specified state 
  4. All OK.