LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Displays And Gauges) >> Diagnostic Information and Procedures >> DTC B0158 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify the scan tool parameter:Ambient Air Temperature = -40 to 88°C (-40 to 190°F) and changes
    • If not between -40 and 88°C (-40 and 190°F) or does not change 

      Refer to: Circuit/System Testing

    • Go to next step: If between -40 and 88°C (-40 and 190°F) and changes 
  3. Perform the special tool function:Ambient Air Temperature Instant Update
  4. Verify the following parameter is within 5°C (8°F) of the actual ambient air temperature:Ambient Air Temperature
    • If not within 5°C (8°F) of the actual ambient air temperature 

      Refer to: Circuit/System Testing

    • Go to next step: If within 5°C (8°F) of the actual ambient air temperature 
  5. All OK.
scientia non olet · About LEMON Manuals