Fastener Specifications
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Transmission Fluid Cooler Pipe Fitting Seal |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Transmission Cooler Bypass Valve Bracket Bolt (LKN) | 4 N.m (35 lb in) |
| Transmission Fluid Cooler Inlet and Outlet Pipe Bolt (LKN) | 9 N.m (80 lb in) |
| Transmission Fluid Cooler Inlet Pipe Nut (LTG) | 22 N.m (16 lb ft) |
| Transmission Fluid Cooler Outlet Pipe Nut (LTG) | 22 N.m (16 lb ft) |
| Transmission Fluid Cooler Pipe Bolt (LKN) | 22 N.m (16 lb ft) |