LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 70 (Automatic Transmission Cooling System) >> Repair Instructions >> Transmission Fluid Cooler Inlet Pipe Replacement (LFV with MRG (at the air conditioning condenser bracket)) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5107622Courtesy of GENERAL MOTORS COMPANY

    Remove the front bumper fascia. (1) Front Bumper Fascia Replacement

  2. Place a drain pan under the vehicle.
  3. GM5131516Courtesy of GENERAL MOTORS COMPANY
    NOTE:

    Cover or plug all open transmission fluid cooler pipe connection points to help avoid any accidental contamination.

    Transmission Fluid Cooler Inlet Pipe (1) @ Transmission Fluid Cooler Inlet and Outlet Pipe - Disengage - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 

  4. GM4323887Courtesy of GENERAL MOTORS COMPANY

    Radiator Air Upper Baffle and Deflector (1) - Remove - Radiator Air Upper Baffle and Deflector Replacement (LFV, LTG)

  5. GM5129694Courtesy of GENERAL MOTORS COMPANY

    Transmission Fluid Cooler Inlet Pipe (1) @ Transmission Fluid Auxiliary Cooler - Disengage - Transmission Fluid Cooler Hose/Pipe Quick-Connect Fitting Disconnection and Connection 

  6. Transmission Fluid Cooler Inlet Pipe (1) - Remove
scientia non olet · About LEMON Manuals