Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Remove the front bumper fascia. (1) Front Bumper Fascia Replacement
Courtesy of GENERAL MOTORS COMPANY

Radiator Air Upper Baffle and Deflector (1) - Remove - Radiator Air Upper Baffle and Deflector Replacement (LFV, LTG)
Place a drain pan under the vehicle.
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Cover or plug all open transmission fluid cooler pipe connection points to help avoid any accidental contamination.

Transmission Fluid Cooler Inlet and Outlet Pipe (1) - Remove - Transmission Fluid Cooler Inlet and Outlet Pipe Replacement (LFV with MRG)
Courtesy of GENERAL MOTORS COMPANY

Remove the LFV with MRG transmission fluid cooler inlet pipe at air conditioning condenser bracket (1). Transmission Fluid Cooler Inlet Pipe Replacement (LFV with MRG (at the air conditioning condenser bracket)) , or Transmission Fluid Cooler Inlet Pipe Replacement (LFV with MRG (from the transmission to the transmission fluid cooler inlet pipe))
Radiator Air Lower Baffle and Deflector (1) - Remove - Radiator Air Lower Baffle and Deflector Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Impact Bar (1) - Remove - Front Bumper Impact Bar Replacement
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector at the air conditioning refrigerant pressure sensor.
Air Conditioning Condenser (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Condenser Bracket (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Transmission Fluid Auxiliary Cooler (1) - Remove