Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Install the door side hinge bolts.
Tighten
Tighten the bolts to 25 N.m (18 lb ft).
- Inspect the door for proper operation and alignment.
- Remove the tape.
CAUTION:
Refer to Fastener Caution .
- Install the body side hinge bolts.
Tighten
Tighten the bolts to 32 N.m (24 lb ft).
- Adjust the rear side door lock striker, if needed. Rear Side Door Lock Striker Adjustment
- Inspect the door for proper operation and alignment.
- Remove the tape.
CAUTION:
Refer to Fastener Caution .