Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9) - Disconnect
Rear Body Fuse Block Cover(1) - Remove
Disconnect all electrical connectors.(1)
Generator and Battery Cable Nut - Rear (1) - Remove[2x]
- Generator and Battery Cable (2) - Remove
Positive Battery Clamp Nut. (1) - Loosen
- Release the tabs on each side of the battery distribution engine compartment fuse block (2) and remove.