Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
Use a flat-bladed tool to release the locking tab on the connector.
 Courtesy of GENERAL MOTORS COMPANY
|
Option 1: Twist the flat-bladed tool to push the top of the locking tab inward while pulling the connector body out.
 Courtesy of GENERAL MOTORS COMPANY
|
Option 2: Pry using the flat-bladed tool to depress the locking tab while pulling the connector body out.