Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Ignition - On / Vehicle - In Service Mode
- Operate the component:S13 Door Lock Switch - Lock Switch & Unlock Switch
Verify the component works as specified:
- A23LR Door Latch Assembly - Left Rear = Lock & Unlock
- A23RR Door Latch Assembly - Right Rear = Lock & Unlock
- If the component does not work as specified
Refer to:Power Door Locks Malfunction
- Go to next step: If all functions work properly
- Operate the component:S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the scan tool parameter:Left Rear Child Security Lock Switch = Active & Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- Operate the component:S13D Door Lock Switch - Driver - Lock Switch & Unlock Switch
Verify the scan tool parameter:Right Rear Child Security Lock Switch = Active & Inactive
- If not the specified state
Refer to: Circuit/System Testing
- Go to next step: If the specified state
- If not the specified state
- All OK.