LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Door Lock System) >> Diagnostic Information and Procedures >> Door Ajar Indicator Malfunction (AEC, AED, AEQ) >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition - On / Vehicle - In Service Mode
  2. Verify the appropriate scan tool door ajar switch parameter changes when opening and closing the vehicle doors.
    • {Driver Door Ajar Switch}If the parameter state does not change 

      Refer to: Circuit/System Testing - Test 1

    • {Passenger Door Ajar Switch}If the parameter state does not change 

      Refer to: Circuit/System Testing - Test 2

    • {Left Rear Door Ajar Switch}If the parameter state does not change 

      Refer to: Circuit/System Testing - Test 3

    • {Right Rear Door Ajar Switch}If the parameter state does not change 

      Refer to: Circuit/System Testing - Test 4

    • Go to next step: If the parameter state changes 
  3. All OK.
scientia non olet · About LEMON Manuals