Control Valve Body Plate Disassemble
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Control Valve Body Plate Disassemble
| Callout | Component Name |
|---|---|
| 1 | Control Valve Solenoid Body Bolt [2x] |
| 2 | Oil Transfer Plate |
| 3 | Control Valve Body Locating Pin [2x] |
| 4 | Control Valve Body Spacer Plate
NOTE:
Inspect the channel plate bolt pass through holes for damage or brinelling. Any damage will cause incorrect pressure switch operation. Replace as necessary. |
| 5 | Variable Feed Solenoid Clutch Accumulator Piston Spring [2x] |
| 6 | Variable Feed Solenoid Clutch Accumulator Piston [2x] |
| 7 | Control Valve Body Ball Check Valve [2x] |