Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9)
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Battery Positive Cable Nut (1) @ Starter Solenoid - Remove
- Battery Positive Cable (2) - Remove
Disconnect the electrical connector. (2)
Remove the starter bracket fastener. (1)
- Remove the starter bracket fastener. (2)
- Remove the starter bracket. (3)
Starter Mounting Nut (2) - Remove
- Starter Mounting Bolt (1) - Remove
- Starter (3) - Remove