Removal Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the negative battery cable. Battery Negative Cable Disconnection and Connection (Without KL9) , or Battery Negative Cable Disconnection and Connection (With KL9)
- Drive Belt Replacement - Remove
- Air Cleaner Assembly Replacement - Remove
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Battery Positive Cable Nut (1) - Remove
- Battery Positive Cable (2) - Remove
- Electrical Connector (4) - Disconnect
- Lower the vehicle.
Generator Bolt (1) - Remove [2X]
- Generator Nut (2) - Remove
- Remove generator mounting stud, if necessary. (3)
- Remove the generator. (4)