Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Battery Tray (2) - Install
- Battery Tray Mounting Bolt (1) - Install and tighten [3x] 22 N.m (16 lb ft)
Battery Tray Mounting Nut (1) - Install and tighten [2x] 22 N.m (16 lb ft)
- Connect any harness retainers to the battery tray.
Engine Control Module (2) - Install - Engine Control Module Replacement
Battery (3) - Install - Battery Replacement
CAUTION:
Refer to Fastener Caution