Circuit/System Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Visual/Physical Inspection - Hybrid/EV Battery Pack Cooling Fan - Inlet and Outlet Hose
- Inspect for obstructions - Inlet and Outlet Hose
- If the specified state
- Repair or replace as necessary.
- Go to next step: If not the specified state
- Hybrid/EV Battery Pack Cooling Fan - Ensure that all ducts have been routed, installed and secured properly. - Inspect for obstructions
- If not the specified state
Repair or replace as necessary. - Service the system when it is cool.
- Go to next step: If the specified state
- If not the specified state
- Ignition On
- Verify DTC P0AF7 is not set.
- If the DTC is set
Replace the appropriate component:K1 14V Power Module
- Go to next step: If the DTC is not set
- If the DTC is set
All OK.