LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Hybrid/EV Controls) >> Repair Instructions >> Accessory DC Power Control Module Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disable the high voltage system. High Voltage Disabling
  2. GM4316329Courtesy of GENERAL MOTORS COMPANY

    Drive Motor Generator Control Module Tray (2) - Remove - Drive Motor Generator Control Module Tray Replacement

  3. GM4316486Courtesy of GENERAL MOTORS COMPANY

    High Voltage Electrical Connector (1) - Disconnect

  4. Electrical Connector (2) - Disconnect
  5. Release the retainers. (3)
  6. GM4316679Courtesy of GENERAL MOTORS COMPANY

    Battery Positive Junction Block Cable Bolt (1) @Accessory DC Power Control Module - Remove

  7. Retainer (2) - Disengage
  8. Battery Positive Junction Block Cable (3) - Reposition away
  9. Drive Motor Battery Impact Absorber (4) - Remove
  10. GM4316483Courtesy of GENERAL MOTORS COMPANY

    Accessory DC Power Control Module Nut (1) - Remove [2X]

  11. Accessory DC Power Control Module Bolt (2) - Remove [2X]
  12. Accessory DC Power Control Module (3) - Remove
scientia non olet · About LEMON Manuals