LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Hybrid/EV Controls) >> Diagnostic Information and Procedures >> DTC P1E1B-P1E1F >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

P1E1B 

The motor control module detects a correlation difference between the Isolation Supply sensor and overall pack voltage.

P1E1C and P1E1E 

The motor control module detects Isolation Supply sensor voltage less than 20 V.

P1E1D and P1E1F 

The motor control module detects Isolation Supply sensor voltage greater than 40 V.