Conditions for Setting the DTC
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Condition 1
Position sensor offset value not learned because drive motor speed is greater than 50 RPM.
Condition 2
Position sensor offset value not learned because hybrid battery voltage as observed at the motor control module is less than 200 V.
Condition 3
- Position sensor offset value not learned because drive motor phase to phase current difference is less than 30 A.
- P1B0F or P1B10 failed to learn for 15 consecutive key cycle learn attempts.