LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Hybrid/EV Controls) >> Diagnostic Information and Procedures >> DTC P0AEE, P0AEF, P0AF0, P0AF3-P0AF5, P0BD2-P0BD4, P0BD7-P0BD9, P0BDC-P0BDE, or P0BE1-P0BE3 >> Conditions for Setting the DTC

Conditions for Setting the DTC

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

P0AEE, P0AF3, P0BD2, P0BD7, P0BDC, and P0BE1 

A 20°C (36°F) difference is observed between the individual inverter phase temperature sensor and the average of the power electronics coolant and transmission fluid temperatures, at vehicle ON after a cold soak.

P0AEF, P0AF4, P0BD3, P0BD8, P0BDD, and P0BE2 

The inverter phase temperature sensor is greater than 170°C (338°F) for 3 s.

P0AF0, P0AF5, P0BD4, P0BD9, P0BDE, and P0BE3 

The inverter phase temperature sensor is less than -50°C (-58°F) for 2.6 s.

scientia non olet · About LEMON Manuals