LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Hybrid/EV Controls) >> Diagnostic Information and Procedures >> DTC P06B1, P06B2, P06B4, P06B5, P06E7, or P06E8 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
  1. Vehicle ON.
  2. Verify DTC P06B1, P06B2, P06B4, P06B5, P06E7, or P06E8 is not set.
    • If any of the DTCs are set 
    1. Verify the T6 Power Inverter Module has the latest calibration in Calibration Information.
      • If the T6 Power Inverter Module does not have the latest calibration, program the T6 power inverter module.
      • If the T6 Power Inverter Module has the latest calibration, replace the T6 Power Inverter Module.
    2. Verify the DTC does not set.
      • If the DTC sets, replace the T6 Power Inverter Module.
      • Go to next step: If the DTC does not set.
    3. All OK
    • Go to next step: If none of the DTCs are set 
  3. All OK
scientia non olet · About LEMON Manuals