Exhaust Rear Bracket Replacement (LKN)
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name |
|---|---|
|
WARNING:
In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.
WARNING:
Preliminary Procedure Raise and support the vehicle. Lifting and Jacking the VehicleAvoid contact with HOT components. Wear safety glasses and protective gloves to avoid personal injury. |
|
| 1 | Wiring Harness Retainer |
| 2 | Exhaust Rear Bracket Nut [2x]
CAUTION:
Refer to Fastener Caution . Tighten 22 N.m (16 lb ft) |
| 3 | Exhaust Rear Bracket Bolt [2x] Tighten 22 N.m (16 lb ft) |
| 4 | Exhaust Rear Bracket |