Installation Procedure
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- NOTE:
Install a NEW gasket.
Exhaust Front Pipe (3) - Install
- Exhaust Front Pipe Bracket Bolt (2) - Install and tighten [2x] 22 N.m (16 lb ft)
- Catalytic Converter Nut (1) - Install and tighten [2x] 22 N.m (16 lb ft)
- NOTE:
Install a NEW gasket.
Exhaust Gasket (2) - Install
- Exhaust Muffler Assembly (3) - Connect
- Exhaust Front Pipe Nut (1) - Install and tighten [2x] 22 N.m (16 lb ft)
- Exhaust Pipe Front Hanger Bracket Replacement - Install
CAUTION:
Refer to Fastener Caution .