Conditions for Setting the DTC

P1516

• The following parameters are not within 2% of each other:
  • Desired Throttle Position
  • Throttle Position

DTC P2101 Condition 1

• The following parameters are not within 10% of each other:
  • Desired Throttle Position
  • Throttle Position

Condition 2

• Throttle Position Learn = Active
• Throttle Position = Greater than 36%

Condition 3

• Throttle Position Learn = Active
• Throttle Position = Greater than 45%

P2119 

The throttle blade has not reached the closed position after the engine has been turned off.

or

The throttle blade is not closed by the spring.

P2176 

Minimum Throttle Position Not Learned = Exceeded Number of Attempts