Repair Verification
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Drive the vehicle for greater than 0.1 mi.
- Park the vehicle and let it set for a minimum of 6 h. This allows the ECM to request a K114B Hybrid/EV Powertrain Control Module 2 wake-up to occur.
- Vehicle in Service Mode.
- Verify DTC P06E4 did not set.
- If DTC is set
Replace the K20 Engine Control Module and repeat steps 1 - 4.
- Go to next step: If no DTC's are set
- If DTC is set
- All OK.