Component Testing
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Static Test
- Vehicle OFF, disconnect the harness connector at the Q12 Evaporative Emission Purge Solenoid Valve.
- Test for 10-30 Ω between the control terminal A or 2 and the B+, terminal B or 1.
- If not between 10-30 Ω
Replace the Q12 Evaporative Emission Purge Solenoid Valve.
- Go to next step: If between 10-30 Ω
- If not between 10-30 Ω
- All OK.