LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2020 >> Malibu LS >> Repair and Diagnosis >> External Pages >> Different car >> Section 49 (Engine Controls And Fuel - 1.8L (LKN) - DTC P0010-DTC P0459) >> Diagnostic Information and Procedures >> DTC P0097, P0098, or P0099 >> Conditions for Setting the DTCs

Conditions for Setting the DTCs

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

P0097 

NOTE:

The scan tool display range is between -40 and +150°C (-40 and +302°F).

The ECM detects that the IAT sensor 2 signal is less than 13 Hz, colder than -60°C (-76°F), for greater than 4 s.

P0098 

The ECM detects that the IAT sensor 2 signal is greater than 390 Hz, warmer than 150°C (302°F), for greater than 4 s.

P0099 

The ECM monitors the IAT sensor 2 signal every 100 ms to determine if the signal has changed greater than 80%. The DTC sets when the condition exists for greater than 4 s.

scientia non olet · About LEMON Manuals