Front Bumper Lower Fascia Replacement

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedures Front Bumper Fascia Center Air Deflector Replacement Front Bumper Fascia Lower Stiffener Replacement
1	Front Bumper Lower Fascia Bolt [2x] CAUTION: Refer to Fastener Caution . Tighten 2.5 N.m (22 lb in)
2	Front Bumper Lower Fascia Clip [4x]
3	Front Bumper Lower Fascia Procedure Place the front bumper fascia down on a clean protected surface. Carefully depress the tabs one at a time and pull on the fascia at the same time to gradually remove the lower fascia from the fascia. Transfer components as necessary.