Installation Procedure

WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

With the aid of an assistant, install the fascia. (1)
Connect the electrical connectors.
Courtesy of GENERAL MOTORS COMPANY

Secure the tabs on the fascia (1) to the front bumper fascia guide.
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Front Bumper Fascia Bolt (1) - Install and tighten [4x] 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Bolt (2) - Install and tighten [5x] 2.5 N.m (22 lb in)
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Splash Shield (2) - Install - Front Compartment Splash Shield Replacement
Courtesy of GENERAL MOTORS COMPANY

Front Compartment Air Deflector (4) - Install - Front Compartment Air Deflector Replacement
Install the left side front wheelhouse liner bolts. Front Wheelhouse Liner Replacement - Left Side
Install the right side front wheelhouse liner bolts. Front Wheelhouse Liner Replacement - Right Side (LFV, LTG)Front Wheelhouse Liner Replacement - Right Side (LKN)
Courtesy of GENERAL MOTORS COMPANY

Front Bumper Fascia Upper Molding (2, 3) - Install - Front Bumper Fascia Upper Molding Replacement