Fastener Specifications
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
Single Use Non-Threaded Fasteners/Components
|
NOTE:
All fasteners/components listed in this table MUST BE DISCARDED and replaced with NEW after removal. |
|---|
| Application |
| Front Side Door Trim Belt Line Clip |
| Front Side Door Trim High - Retention Retainer |
| Windshield Garnish Molding Tether Clip |
Reusable Threaded Fastener Tightening Specifications
|
NOTE:
All fasteners listed in this table can be reused after removal. |
|
|---|---|
| Application | Specification |
| Metric (English) | |
| Center Pillar Upper Garnish Molding Bolt | 3 N.m (27 lb in) |
| Coat Hook Fastener | 6 N.m (53 lb in) |
| Front Side Door Armrest Pull Cup Fastener | 2.5 N.m (22 lb in) |
| Front Side Door Inside Handle Fastener | 2.5 N.m (22 lb in) |
| Front Side Door Trim Panel Fastener | 2.5 N.m (22 lb in) |
| Quarter Window Trim Finish Panel Fastener | 3 N.m (27 lb in) |
| Rear Side Door Armrest Pull Cup Fastener | 2.5 N.m (22 lb in) |
| Rear Side Door Inside Handle Fastener | 2.5 N.m (22 lb in) |
| Rear Side Door Trim Panel Fastener | 2.5 N.m (22 lb in) |
| Roof Rail Assist Handle Bolt | 6 N.m (53 lb in) |
| Sunshade Fastener | 2.5 N.m (22 lb in) |
| Sunshade Support Fastener | 2.5 N.m (22 lb in) |