Rear Window Panel Trim Replacement
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of GENERAL MOTORS COMPANY
|
| Callout |
Component Name |
|
Preliminary Procedures
- Quarter Window Lower Trim Finish Panel Replacement
- Body Side Rear Window Garnish Molding Replacement
- Fold down rear seat to access retainers.
|
| 1 |
Rear Window Panel Trim Retainer[3x]
Procedure
Use a flat bladed plastic trim tool. |
| 2 |
Rear Window Panel Trim Procedure
- Lift up on the rear window panel. Using a suitable tool, press the button to release the belt from the mini buckle.
- Release the rear center seat belt opening bezel from the rear center seat belt retractor.
- With the aid of an assistant, guide the rear window panel forward in the vehicle and upwards to clear the speaker system.
- When replacing the rear window panel trim assembly, transfer all necessary components.
- Ensure the rear window trim panel feet are seated into the rear window sheet metal drain shoe.
|