Conditions for Running the DTC
WARNING: This page is about a different car, the 2019 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
DTC B1325 must not be set as current for the amplifier to run any of the following tests.
DTC B1025 01, B1035 01, B1045 01, B1055 01, B1085 01, B1095 01, B1105 01
The test is run initially upon amplifier wake-up, and periodically every one second after amplifier operation begins.
DTC B1025 02, B1035 02, B1045 02, B1055 02, B1085 02, B1095 02, B1105 02
The test is run initially upon amplifier wake-up, and periodically every one second after amplifier operation begins.
DTC B1025 04, B1035 04, B1045 04, B1055 04, B1085 04, B1095 04, B1105 04
The test is run once during amplifier wake-up.